How to Remove Industrial Grease from Fabric and Metal

Updated: 4 days ago

Industrial grease comes off when you match the method to the surface: absorb the bulk first, apply a degreaser or pre-treatment made for the soil, give it time and mechanical action, rinse or launder, then check the result. On work clothes, that means a powder, a pre-wash treatment and a heavy-duty detergent in hot water. On metal parts and equipment, it means a compatible degreaser, the right tool and a rinse and dry step. Our STP Industrial Degreasers and GreenStory Industrial Laundry Detergent are built for these two jobs, and the sections below show where each fits.
Key Takeaways
Remove as much grease as you can before any liquid touches it. Absorb or scrape first, then clean.
Fabric and metal need different chemistry. Heavy-duty detergent and hot water suit washable work clothes. A degreaser matched to the soil and the metal suits parts and equipment.
Cleaning is a process, not a spray: identify the soil, apply the cleaner, remove the released contamination, rinse, dry and verify.
Never mix cleaners, wear the PPE the safety data sheet (SDS) calls for, and handle used oil and oily waste under the rules that apply to you.
A solvent-free industrial degreaser lets crews cut heavy soil without adding solvent fumes to the shop. Our STP Industrial Degreasers are made for that.
Table of Contents
Start by Identifying What You Are Removing
Grease is not one material. A lithium bearing grease on a mechanic’s coveralls, a cutting fluid film on a machined part, and baked-on food-plant fat on a conveyor frame behave differently and respond to different cleaners. The first step in any industrial cleaning process is naming the soil, because that decides the chemistry and the action you use. The MKTech industrial cleaning handbook frames cleaning as a complete sequence: identify the soil, select compatible chemistry and action, remove the released contamination, rinse where required, dry promptly and verify the surface against its next operation.
That last point matters more than people expect. A part that looks clean but carries a film can fail at paint, coating or assembly. A uniform that looks clean but retains grease at the cuffs will stain again in the next wash. Decide what “clean” means for the next step before you start, then check against it.
Two practical questions sort most jobs:
What is the surface? Washable fabric, bare metal, coated or painted metal, concrete floor, or rubber and plastic each tolerate different cleaners and tools.
How much grease is there? A thick deposit needs bulk removal before cleaning. A thin film needs chemistry and contact time.
How to Remove Industrial Grease from Work Clothes
Work clothes carry the most stubborn grease problem because the oil works into the weave and is often washed in cool water, which sets it. The sequence below follows guidance from university extension and cleaning-industry sources.
Step 1: Absorb the excess
Do not rub fresh grease. UGA Extension advises applying talcum powder to a grease stain to absorb as much as possible, then brushing it off thoroughly. Repeat if the powder clumps with oil. Where it goes wrong: pressing the powder in hard, or skipping this step and going straight to liquid, which spreads the grease across more fibers.
Step 2: Pre-treat the stain
Apply a commercial pre-wash spot and stain remover to the affected area, as UGA Extension recommends. Work it in gently and give it time to penetrate before the wash. Test on a hidden seam first, because the same extension guidance cautions to follow care labels and pretest cleaning agents for colorfastness. High-visibility and dark uniforms are the usual victims of skipped testing.
Step 3: Wash hot with a heavy-duty detergent
Launder in the hottest water that is safe for the fabric, using a heavy-duty liquid detergent. The American Cleaning Institute gives the same core instruction for grease stains on clothing: pretreat, then wash in the hottest water the fabric allows.
This is the step where the detergent counts. For uniforms laundered in volume, we make GreenStory Industrial Laundry Detergent for commercial cleaning power. It is designed around plant-powered, biodegradable chemistry, so shops and laundries get a work-clothes detergent without leaning on harsh ingredients.
Step 4: Check before drying
This is the step most people get wrong. Heat from a dryer sets any remaining grease permanently. Inspect the garment wet and in good light. If a shadow remains, repeat the pre-treatment and wash rather than drying it.

Step 5: Treat a stain that has already been washed or dried
The ACI approach for a stubborn mark is to apply a concentrated heavy-duty cleaner labeled for grease stains, scrub gently with a small brush such as an old toothbrush, and launder again. Old stains rarely come out in one pass. Plan on two or three rounds, and keep the item out of the dryer between them.
Safety for laundry chemicals
Use adequate ventilation when working with caustic or commercial solutions, and store and dispose of products as the label says. Wash shop garments separately from household laundry, since oil-soaked items shed grease into the rest of the load.
How to Remove Industrial Grease from Metal Parts and Equipment
Metal surfaces call for a different routine. The goal is to lift the grease and its embedded contaminants, carry them away and leave a surface ready for its next job.
Step 1: Remove the bulk
Scrape heavy deposits with a plastic scraper or wipe with an absorbent before any cleaner goes on. Cleaner spent on a quarter inch of grease is cleaner wasted, and the grease turns the solution into a dirty slurry that redeposits soil. Where it goes wrong: using a steel scraper on soft or coated metal and scratching the surface you are trying to protect.
Step 2: Choose a cleaner that fits the soil and the metal
Water-based alkaline cleaners are the workhorse of metal degreasing. A handbook on alkaline cleaners describes two mechanisms at work: alkalinity can convert certain soils into water-soluble soaps, and surfactants lower surface tension so soils are emulsified and lifted off the object. It also reports that alkaline cleaners work well on unpigmented oils, greases and cutting or grinding fluids on metal parts, and that aqueous alkaline cleaning has become a leading method for metalworking parts because it leaves no residual soils behind.
Compatibility is the check that prevents damage. Strongly alkaline products can attack some metals, so read the SDS and the product page for the surfaces listed before you spray a whole line. Our STP Industrial Degreaser is made for powerful cleaning without solvents. That means maintenance teams get heavy-duty grease cutting without solvent vapors in the work area. You can see the full range on the STP Industrial Degreasers & Cleaners page.
Step 3: Apply, wait and agitate
Apply the degreaser as the label directs, let it dwell so the chemistry can work, then add mechanical action. Match the tool to the surface:
Surface | Suitable tool | Watch for |
Painted or coated components | Soft or stiff nylon brush, cloth | Aggressive brushes that cut through the coating |
Bare metal with heavy deposits | Nylon brush first, wire brush only if needed | Scratching; never use wire brushes on coated surfaces |
Large flat exteriors, floors, frames | Pressure washer after dwell time | Overspray onto electrical parts and drains |
Small parts | Soak in a tub or parts washer | Contaminated solution that has to be changed |
Step 4: Remove the released contamination
This step is the one most often skipped. Loosened grease sitting in a puddle redeposits as it dries. Wipe, flush or rinse so the soil actually leaves the part. Dispose of the rinse water and rags according to the rules below.
Step 5: Rinse, dry and verify
Rinse where the product calls for it, and dry promptly. Bare steel left wet can flash rust within hours. Then verify the surface against what happens next: paint adhesion, assembly, food contact or simply a visual inspection. A white wipe passed across the surface is a quick shop check for remaining film.

Cleaning Grease in Food Plants and Other Sanitation Settings
In food processing, grease removal is the first half of sanitation, because sanitizers and disinfectants work on clean surfaces rather than on soil. Fats and oils have to come off conveyors, drains, floors and equipment frames before any disinfection step, and the cleaning needs a documented verification. Our guide to food plant sanitation programs, steps and verification lays out how that sequence is built. For crews who want heavy soil removal without solvents, our piece on solvent-free industrial cleaners and degreasers covers how those products perform.
Safety: Protect People Before You Clean
Degreasing is chemical handling, and the safety checks are not optional.
Read the SDS first. It states the PPE, ventilation needs and handling rules for the exact product.
Wear the right PPE. Chemical-resistant gloves and eye protection are the baseline for degreasers. Add protective clothing for splash risk, and respiratory protection only where the SDS or an exposure assessment requires it.
Respect concentrated alkalis. The MKTech handbook warns that concentrated alkalis can cause serious skin and eye injury and advises avoiding splashing when you mix or handle them. It also cautions against improvising neutralization on workpieces or spills.
Never mix cleaners. Per the same handbook, acid combined with hypochlorite-containing material can release toxic gas, and acid combined with alkali can generate violent heat and splashing. Mix products only when the manufacturer explicitly specifies the combination.
Ventilate. Open the space or use mechanical ventilation, especially when working in tanks, pits or enclosed bays.
If someone gets a splash in the eyes or a reaction after mixing chemicals, follow the first-aid section of the SDS and call your local poison control center or emergency services.
Handling Used Oil and Oily Waste
What you remove has to go somewhere. In the United States, used oil is regulated under 40 CFR Part 279, the EPA’s standards for managing used oil. The rule presumes used oil is recycled unless a handler disposes of it or sends it for disposal, and it applies to used oil and to materials identified as subject to regulation as used oil. It also prohibits managing used oil in surface impoundments or waste piles unless those units are regulated under parts 264 or 265.
In practice for a shop or plant:
Collect heavy grease and oil in labeled, closed containers rather than rinsing it into drains.
Keep oily rags in a closed container and not in pockets.
Do not mix waste oil with solvents or fuel.
Check with your state environmental agency and your waste hauler for local requirements, since states can be stricter than the federal rule.
A cleaner that works without solvents also makes the waste picture simpler, since there is no solvent to segregate from the recoverable oil. Confirm the specifics for your site with your environmental compliance contact.
Common Mistakes That Leave Grease Behind
Starting with water. Grease and water do not mix. Absorb or scrape first.
Skipping dwell time. Spraying and wiping immediately gives the chemistry no time to emulsify the soil.
Drying before inspecting. On fabric, heat sets what is left. On metal, a wet surface can corrode.
Using one cleaner for everything. A degreaser right for a steel frame may not belong on aluminum or coated components. Check the SDS for compatible surfaces.
Ignoring the next operation. A part headed for paint or food contact needs verification, not just a good look.
Where GreenStory Fits in a Grease-Removal Routine
We make cleaning products for industrial, commercial, agricultural and consumer use, and two of them map directly onto the routines above. STP Industrial Degreasers are for equipment, parts and facilities where heavy grease needs to come off without solvents. GreenStory Industrial Laundry Detergent is for the uniforms and shop towels that come back covered in the same grease. Both are part of a range designed to keep performance high while using plant-powered, biodegradable formulas, low-VOC ingredients and recyclable packaging.
For distributors, janitorial suppliers and retailers, we also develop private-label formulations. You can browse the whole lineup on our industrial cleaning products page.

If you manage a plant, fleet, kitchen or maintenance shop, start with the product page for the surface you clean most, and bring the SDS questions to us.
Our Perspective on Grease Removal
Most grease problems we hear about are not really cleaner problems. They are process problems: the soil was never identified, the contact time was too short, or the rinse step was skipped. When those are fixed, the choice of chemistry becomes the part that decides how much work the crew does and how safe the space is to work in. That is why we put so much into green chemistry. We work with scientists and engineers to build products that perform on the soils industrial users actually face, while using plant-powered, biodegradable formulas and low-VOC ingredients. A degreaser that cuts grease without solvents changes the daily experience in a shop: fewer fumes to manage, a simpler waste conversation, and a product crews are not hesitant to use. Our approach is to pair strong performance with responsibility, so a plant manager does not have to choose between a clean floor and a cleaner footprint. If you are rethinking your degreasing and laundry routine, we would like to help you build one that works from the first pass. Meghan
FAQ
Can you get industrial grease out of a shirt that has already been washed?
Often, yes, but it takes more than one round. Apply a concentrated heavy-duty cleaner labeled for grease stains, scrub gently with a small brush, then launder again in the hottest water the fabric allows, as the American Cleaning Institute advises. Do not machine dry until the stain is gone, because heat sets what remains.
What gets motor grease out of clothes?
Start with talcum powder to absorb the grease, brush it off, then treat the spot with a pre-wash stain remover. Wash with a heavy-duty detergent in the hottest water that is safe for the fabric. For uniforms washed in volume, our industrial laundry detergent is made for that workload.
How do you remove grease from metal parts?
Scrape or wipe off the bulk, apply a degreaser that suits the soil and the metal, let it dwell, agitate with a tool that will not damage the surface, then rinse and dry promptly. Verify the surface against what happens next. For solvent-free degreasing, see our STP Industrial Degreaser.
Is it safe to mix degreasers to make them stronger?
No. Mixing incompatible cleaners can release toxic gas or cause violent heat and splashing, so combine products only when the manufacturer specifically says to. Use one product at a time, follow the SDS and wear the specified gloves and eye protection.
How do I dispose of used grease and oily rags?
Collect used oil and heavy grease in closed, labeled containers and keep oily rags in a closed container. In the US, used oil is covered by EPA’s 40 CFR Part 279, and your state agency or waste hauler can confirm local requirements. Do not pour oil or solvent waste down drains.
Sources
Recommended

Comments